LUGGAGE DOOR HINGE TORSION BAR INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • The installation should be performed in the order of RH to LH.

  • After installing the torsion bar, use your hand to open and close the luggage door. Make sure the luggage door opens and closes smoothly.

PROCEDURE


  1. INSTALL LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT


    1. A004U3Z

      Install the luggage compartment door torsion bar support as shown in the illustration.

  2. INSTALL LUGGAGE DOOR HINGE TORSION BAR RH


    1. A004OMTE02
      Text in Illustration
      *1 Installation Hole
      *2

      Installation Hole

      (for Adjustment)

      Set the tip of the luggage door hinge torsion bar RH into the installation hole in the center. The upper and lower holes are used for adjustment.

    2. A004QI2

      Connect the luggage door hinge torsion bar RH to the body LH side.

    3. A004P74E02

      Using SST, install the luggage door hinge torsion bar RH to the luggage door hinge and body RH side.

      SST
      09804-24010
    4. A004U4Y

      Connect the luggage door hinge torsion bar RH to the luggage compartment door torsion bar support.

  3. INSTALL LUGGAGE DOOR HINGE TORSION BAR LH


    1. A004S40E02
      Text in Illustration
      *1 Installation Hole
      *2

      Installation Hole

      (for Adjustment)

      Set the tip of the luggage door hinge torsion bar LH into the installation hole in the center. The upper and lower holes are used for adjustment.

    2. A004R2D

      Connect the luggage door hinge torsion bar LH to the body RH side.

    3. A004R8NE02

      Using SST, install the luggage door hinge torsion bar LH to the luggage door hinge and body LH side

      SST
      09804-24010
    4. A004RO1

      Connect the luggage door hinge torsion bar LH to the luggage compartment door torsion bar support.

    5. A004UA5

      Attach the 2 claws to close the cover.

  4. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH


    1. A004PY1

      Pass the fuel lid opener cable through the trim cover.

    2. A004T7I

      Install the trim cover with the 4 clips.

  5. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH


    1. A004UCNE02
      *1 Slit

      Install the trim cover with the 4 clips.

  6. INSTALL REAR FLOOR FINISH PLATE


    1. A004SBO

      Attach the 4 clips to install the rear floor finish plate.

    2. A004OAR

      Install the 2 clips.

  7. INSTALL ROPE HOOK ASSEMBLY


    1. A004R66

      Install the 4 rope hooks with the 4 bolts.

      Torque:
      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }

  8. INSTALL REAR FLOOR BOARD SPACER

    A004NI7E05
    *1 for Full Size Spare Tire:
    *2 Except Full Size Spare Tire:

  9. INSTALL REAR NO. 6 FLOOR BOARD SPACER

    A004OOPE04
    *1 for Full Size Spare Tire:
    *2 Except Full Size Spare Tire:

  10. INSTALL LUGGAGE COMPARTMENT FLOOR CARPET

    A004OW0

  11. INSTALL REAR SIDE SEATBACK ASSEMBLY LH

    Click here

  12. INSTALL REAR SIDE SEATBACK ASSEMBLY RH

    Click here

  13. INSTALL REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    Click here