LUGGAGE DOOR HINGE TORSION BAR REMOVAL

PROCEDURE


  1. REMOVE REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    Click here

  2. REMOVE REAR SIDE SEATBACK ASSEMBLY LH

    Click here

  3. REMOVE REAR SIDE SEATBACK ASSEMBLY RH

    Click here

  4. REMOVE LUGGAGE COMPARTMENT FLOOR CARPET

    A004OW0

  5. REMOVE REAR FLOOR BOARD SPACER

    A004NI7E05
    *1 for Full Size Spare Tire:
    *2 Except Full Size Spare Tire:

  6. REMOVE REAR NO. 6 FLOOR BOARD SPACER

    A004OOPE04
    *1 for Full Size Spare Tire:
    *2 Except Full Size Spare Tire:

  7. REMOVE ROPE HOOK ASSEMBLY


    1. A004R66

      Remove the 4 bolts and 4 rope hooks.

  8. REMOVE REAR FLOOR FINISH PLATE


    1. A004OAR

      Remove the 2 clips.

    2. A004SBO

      Detach the 4 clips and remove the finish plate.

  9. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH


    1. A004T7I

      Using a clip remover, remove the 4 clips.

    2. A004PY1

      Pass the fuel lid opener cable through the trim cover.

    3. Remove the trim cover.

  10. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH


    1. A004UCNE02
      *1 Slit

      Using a clip remover, remove the 4 clips and trim cover.

  11. REMOVE LUGGAGE DOOR HINGE TORSION BAR LH


    1. A004UA5

      Using a screwdriver, detach the 2 claws and open the cover.

      Tech Tips

      Tape the screwdriver tip before use.

    2. A004TAL

      Disconnect the luggage door hinge torsion bar LH from the luggage compartment door torsion bar support as shown in the illustration.

    3. A004PFXE03

      Using SST, disconnect the luggage door hinge torsion bar LH from the luggage door hinge and body LH side as shown in the illustration.

      SST
      09804-24010
    4. A004NN2

      Remove the luggage door hinge torsion bar LH from the body RH side as shown in the illustration.

  12. REMOVE LUGGAGE DOOR HINGE TORSION BAR RH


    1. A004PBK

      Disconnect the luggage door hinge torsion bar RH from the luggage compartment door torsion bar support as shown in the illustration.

    2. A004T1XE02

      Using SST, disconnect the luggage door hinge torsion bar RH from the luggage door hinge and body RH side as shown in the illustration.

      SST
      09804-24010
    3. A004O86

      Remove the luggage door hinge torsion bar RH from the body LH side as shown in the illustration.

  13. REMOVE LUGGAGE COMPARTMENT DOOR TORSION BAR SUPPORT


    1. A004OTX

      Remove the luggage compartment door torsion bar support as shown in the illustration.