LUGGAGE COMPARTMENT DOOR SUPPORT REMOVAL

PROCEDURE


  1. REMOVE LUGGAGE COMPARTMENT FLOOR CARPET

    A004OW0

    1. Remove the luggage compartment floor carpet.

  2. REMOVE REAR FLOOR BOARD SPACER

    A004NI7E04
    Text in Illustration
    *A for Full Size Spare Tire
    *B Except Full Size Spare Tire

    1. Remove the rear floor board spacer.

  3. REMOVE REAR NO. 6 FLOOR BOARD SPACER

    A004OOPE03
    Text in Illustration
    *A for Full Size Spare Tire
    *B Except Full Size Spare Tire

    1. Remove the rear No. 6 floor board spacer.

  4. REMOVE ROPE HOOK ASSEMBLY


    1. A004R66

      Remove the 4 bolts and 4 rope hook assemblies.

  5. REMOVE REAR FLOOR FINISH PLATE


    1. A004U3G

      Remove the 2 clips.

    2. A004SBO

      Detach the 4 clips and remove the rear floor finish plate.

  6. REMOVE LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY RH


    1. A004UCNE01
      Text in Illustration
      *a Slit

      Using a clip remover, remove the 4 clips and luggage compartment trim cover assembly RH.

  7. REMOVE LUGGAGE COMPARTMENT DOOR DAMPER ASSEMBLY

    Note


    • Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinder while servicing.

    • Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.

    • In order to prevent the piston rod from deforming, do not apply any horizontal load to the door support.


    1. A004S17E02
      Text in Illustration
      *1 Protective Tape
      *2 Stop Ring

      Using a screwdriver, remove the 2 stop rings along the groove.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Release the ball joint and remove the luggage compartment door damper assembly.