FUEL LID OPENER MOTOR ASSEMBLY(for Sedan) INSTALLATION

PROCEDURE


  1. INSTALL FUEL FILLER OPENING LID LOCK RETAINER


    1. A004MT9

      Attach the 2 claws to install the fuel filler opening lid lock retainer.

  2. INSTALL FUEL LID WITH MOTOR LOCK ASSEMBLY


    1. A004N9M

      Install the fuel lid with motor lock assembly with the 2 nuts.

      Torque:
      5.5 N*m  { 56 kgf*cm, 49 in.*lbf }

      Tech Tips

      Make sure to pass the emergency strap between the 2 brackets.

    2. Connect the connector.

  3. INSTALL LUGGAGE COMPARTMENT TRIM COVER ASSEMBLY LH

    Click here

  4. INSTALL REAR FLOOR FINISH PLATE

    Click here

  5. INSTALL ROPE HOOK ASSEMBLY

    Click here

  6. INSTALL REAR FLOOR BOARD SPACER

    Click here

  7. INSTALL REAR NO. 6 FLOOR BOARD SPACER

    Click here

  8. INSTALL LUGGAGE COMPARTMENT FLOOR CARPET

    Click here

  9. INSTALL REAR SIDE SEATBACK ASSEMBLY LH

    Click here

  10. INSTALL REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    Click here