ROOF SUNSHADE DISASSEMBLY

PROCEDURE


  1. REMOVE CONNECTOR WIRE

    A004RO8

    1. Detach the 2 clamps.

    2. Disconnect the connector and remove the connector wire.

  2. REMOVE SLIDING ROOF DRIVE GEAR SUB-ASSEMBLY

    A004RDF

    1. Remove the 2 bolts and drive gear.

  3. REMOVE SUNSHADE TRIM SUB-ASSEMBLY


    1. A004ORE

      Remove the 4 screws and No. 1 sliding roof housing frame sub-assembly.

    2. Remove the 2 sliding roof guide rail stoppers.

    3. A004S4DE03
      Text in Illustration
      *1 Sunshade Trim
      *2 No. 2 Sunshade Trim Guide

      Slide the sunshade trim in the direction indicated by the arrow in the illustration.

    4. Disconnect the 2 No. 2 sunshade trim guides from the sunshade trim.

    5. A004MZZE03
      Text in Illustration
      *1 Sliding Roof Drive Cable
      *2 Sunshade Trim
      *3 Sliding Roof Drive Cable Disconnection Direction

      Slide the sunshade trim in the direction of the arrow shown in the illustration.

    6. Disconnect the 2 sliding roof drive cables from the sunshade trim and remove the sunshade trim.

      Note

      Do not bend or twist the sliding roof drive cable as it will damage the cable.

  4. REMOVE NO. 2 SUNSHADE TRIM SUB-ASSEMBLY


    1. Slide the No. 2 sunshade trim and remove it.

  5. REMOVE SLIDING ROOF CABLE GUIDE CASING


    1. A004RAZ

      Remove the 2 sliding roof cable guide casings.