ROOF HEADLINING(for Sedan) DISASSEMBLY

PROCEDURE


  1. REMOVE VANITY LIGHT ASSEMBLY

    A004S0EE16
    Text in Illustration
    *1 Claw (A)
    *2 Claw (B)
    *3 Bulb Holder

    Tech Tips

    Use the same procedure to remove the vanity light on the other side.


    1. Detach the 2 claws (A) and separate the bulb holder from the vanity light as shown in the illustration.

    2. Detach the claw (B) and remove the vanity light.

  2. REMOVE NO. 1 ROOF SILENCER PAD

    A004SUZ

    1. Remove the 3 No. 1 roof silencer pads.

  3. REMOVE NO. 2 ROOF SILENCER PAD

    A004RQN

    1. Remove the 2 No. 2 roof silencer pads.

  4. REMOVE NO. 3 ROOF SILENCER PAD

    A004U5B

    1. Remove the No. 3 roof silencer pad.

  5. REMOVE FRONT ROOF HEADLINING SIDE PAD

    A004MZH

    1. Remove the front roof headlining side pad.

  6. REMOVE ROOF HEADLINING PAD

    A004RMA

    1. Remove the roof headlining pad.

  7. REMOVE NO. 1 ROOF WIRE


    1. Turn the visor connectors approximately 90° clockwise and remove them from the roof headlining.

    2. Remove each piece of tape and the No. 1 roof wire.

      A004PXFE02
      Text in Illustration
      *A for LHD *B for RHD
      *C w/ Rain Sensor *D w/ Pre-crash Safety System
      *E w/ EC Mirror - -
      *1 Visor Connector *2 Tape

  8. REMOVE AMPLIFIER ANTENNA ASSEMBLY

    Click here