FRONT CONSOLE BOX(w/ Console Box Lid) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

  • A bolt without a torque specification is shown in the standard bolt chart Click here.

PROCEDURE


  1. INSTALL CONSOLE BOX ASSEMBLY


    1. for Manual Transaxle:

      Install the console box with the 2 screws.

    2. for Automatic Transaxle

      Install the console box with the 4 screws.

    3. Connect the connectors.

    4. Install the 4 bolts.

      A004P3HE05
      *1 for Manual Transaxle:
      *2 for Automatic Transaxle:

  2. INSTALL CONSOLE BOX CARPET


    1. Install the 2 carpets.

  3. INSTALL REAR CONSOLE BOX CUP HOLDER


    1. Install the cup holder.

  4. INSTALL LOWER INSTRUMENT CLUSTER FINISH PANEL


    1. A004RIXE01
      Text in Illustration
      *1 w/ Seat Heater System

      Connect the connectors.

    2. A004SAN

      Attach the 2 clips to install the finish panel.

  5. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transaxle)


    1. A004QTA

      Connect the connector.

    2. Attach the 2 claws and 6 clips to install the console panel.

  6. INSTALL REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transaxle)


    1. A004P8V

      Attach the 2 claws and 6 clips to install the console panel.

    2. A004TM6

      Attach the cover to the shaft.

  7. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)


    1. A004U8K

      Install the shift lever knob and twist it in the direction indicated by the arrow.

  8. INSTALL SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)


    1. A004PBB

      Install the shift lever knob and twist it in the direction indicated by the arrow.

  9. INSTALL INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  10. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for LHD)

    Click here

  11. INSTALL INSTRUMENT PANEL FINISH PANEL END RH (for RHD)

    Click here

  12. INSTALL NO. 3 BOX PANEL


    1. When replacing the No. 3 box panel with a new one:


      1. A004PTCE01
        Text in Illustration
        *1 Cut

        Cut off the rib (the piece used to maintain the shape of the panel) shown in the illustration.

    2. Attach the 6 clips to install the box panel.

      A004QI6E02
      *1 for Manual Transaxle:
      *2 for Automatic Transaxle:

  13. INSTALL LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  14. INSTALL LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here