UPPER INSTRUMENT PANEL REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL GLOVE COMPARTMENT DOOR LOCKCYLINDER ASSEMBLY (for RHD)


    1. A004T4N

      Insert the bottom side of the glove compartment door lock cylinder as shown in the illustration, hold down the stopper and install the glove compartment door lock cylinder.

  2. INSTALL NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A004O5U

      Attach the 9 claws to install the No. 2 instrument panel register assembly to the install the instrument panel finish panel end LH.

  3. INSTALL NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A004O0S

      Attach the 9 claws to install the No. 1 instrument panel register assembly to the install the instrument panel finish panel end RH.

  4. INSTALL INSTRUMENT PANEL CUSHION (w/ Cushion)


    1. Install the instrument panel cushion in the position shown in the illustration.

      A004OGB

  5. INSTALL NO. 1 INSTRUMENT PANEL STAY


    1. A004O2VE01
      Text in Illustration
      *1 Screw <A>

      Install the No. 1 instrument panel stay with the 2 screws <A>.

  6. INSTALL INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY

    Click here

  7. INSTALL NO. 2 INSTRUMENT PANEL WIRE

    Click here

  8. INSTALL NO. 2 SIDE DEFROSTER NOZZLE


    1. A004R8B

      Attach the 4 claws to install the No. 2 side defroster nozzle.

  9. INSTALL NO. 1 SIDE DEFROSTER NOZZLE


    1. A004N4Y

      Attach the 4 claws to install the No. 1 side defroster nozzle.

  10. INSTALL NO. 1 DEFROSTER NOZZLE GARNISH


    1. Attach the 6 claws to install the No. 1 defroster nozzle garnish.

    2. Install the 8 screws <C>.

      A004TJWE02
      Text in Illustration
      *1 Screw <C> - -

  11. INSTALL INSTRUMENT PANEL CUSHION

    Note

    Installing the part with double-sided tape residue still remaining can cause poor adhesion. Therefore, using a cloth or other material, clean the part until the residue is completely removed (when reusing the upper instrument panel sub-assembly).


    1. Remove the peeling paper from a new instrument panel cushion and press firmly to install the instrument panel cushion in the position shown in the illustration.

      A004TTD

  12. INSTALL NO. 1 INSTRUMENT PANEL CUSHION

    Note

    Installing the part with double-sided tape residue still remaining can cause poor adhesion. Therefore, using a cloth or other material, clean the part until the residue is completely removed (when reusing the upper instrument panel sub-assembly).


    1. Remove the peeling paper from a new No. 1 instrument panel cushion and press firmly to install the No. 1 instrument panel cushion in the position shown in the illustration.

      A004T68

  13. INSTALL NO. 1 METER HOOD RETAINER


    1. A004PKQE02
      Text in Illustration
      *1 Screw <C>

      Install the No. 1 meter hood retainer with the 2 screws <C>.

  14. INSTALL NO. 1 HEATER TO REGISTER DUCT


    1. A004N7ZE02
      Text in Illustration
      *1 Screw <A>

      Install the No. 1 heater to register duct with the 3 screws <A>.

  15. INSTALL NO. 3 HEATER TO REGISTER DUCT


    1. A004Q62E02
      Text in Illustration
      *1 Screw <A>

      Install the No. 3 heater to register duct with the 3 screws <A>.