UPPER INSTRUMENT PANEL DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE NO. 1 HEATER TO REGISTER DUCT


    1. A004N7ZE02
      Text in Illustration
      *1 Screw <A>

      Remove the 3 screws <A> and No. 1 heater to register duct.

  2. REMOVE NO. 3 HEATER TO REGISTER DUCT


    1. A004Q62E02
      Text in Illustration
      *1 Screw <A>

      Remove the 3 screws <A> and No. 3 heater to register duct.

  3. REMOVE NO. 1 METER HOOD RETAINER


    1. A004PKQE02
      Text in Illustration
      *1 Screw <C>

      Remove the 2 screws <C> and No. 1 meter hood retainer.

  4. REMOVE NO. 1 INSTRUMENT PANEL CUSHION


    1. Remove the No. 1 instrument panel cushion.

      A004T68

  5. REMOVE INSTRUMENT PANEL CUSHION


    1. Remove the instrument panel cushion.

      A004TTD

  6. REMOVE NO. 1 DEFROSTER NOZZLE GARNISH


    1. Remove the 8 screws <C>.

    2. Detach the 6 claws and remove the No. 1 defroster nozzle garnish.

      A004TJWE02
      Text in Illustration
      *1 Screw <C> - -

  7. REMOVE NO. 2 SIDE DEFROSTER NOZZLE


    1. A004R8B

      Detach the 4 claws and remove the No. 2 side defroster nozzle.

  8. REMOVE NO. 1 SIDE DEFROSTER NOZZLE


    1. A004N4Y

      Detach the 4 claws and remove the No. 1 side defroster nozzle.

  9. REMOVE NO. 2 INSTRUMENT PANEL WIRE

    Click here

  10. REMOVE INSTRUMENT PANEL PASSENGER WITHOUT DOOR AIRBAG ASSEMBLY

    Click here

  11. REMOVE NO. 1 INSTRUMENT PANEL STAY


    1. A004O2VE01
      Text in Illustration
      *1 Screw <A>

      Remove the 2 screws <A> and No. 1 instrument panel stay.

  12. REMOVE INSTRUMENT PANEL CUSHION (w/ Cushion)


    1. Remove the instrument panel cushion.

      A004OGB

  13. REMOVE NO. 2 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A004O5U

      Detach the 9 claws and remove the No. 2 instrument panel register assembly from the instrument panel finish panel end LH.

  14. REMOVE NO. 1 INSTRUMENT PANEL REGISTER ASSEMBLY


    1. A004O0S

      Detach the 9 claws and remove the No. 1 instrument panel register assembly from the instrument panel finish panel end RH.

  15. REMOVE GLOVE COMPARTMENT DOOR LOCKCYLINDER ASSEMBLY (for RHD)


    1. A004N3IE02
      Text in Illustration
      *1 Protective Tape
      *2 Stopper

      Using a screwdriver, push the stopper of the glove compartment door lock cylinder as shown in the illustration and remove the glove compartment door lock cylinder in the direction of the arrow.

      Tech Tips

      Tape the screwdriver tip before use.