FRONT CONSOLE BOX(w/ Console Box Lid) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  2. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  3. REMOVE NO. 3 BOX PANEL


    1. Place protective tape as shown in the illustration.

      A004RZRE02
      Text in Illustration
      *1 Protective Tape - -

    2. Using a moulding remover B, detach the 6 clips and remove the box panel.

  4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

    Click here

  5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for LHD)

    Click here

  6. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for RHD)

    Click here

  7. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)


    1. A004MTF

      Twist the shift lever knob in the direction indicated by the arrow and remove it.

  8. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)


    1. A004O0L

      Twist the shift lever knob in the direction indicated by the arrow and remove it.

  9. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transaxle)


    1. A004TM6

      Detach the cover.

    2. A004RCV

      Using a moulding remover B, detach the 2 claws.

    3. Detach the 6 clips and remove the console panel.

  10. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transaxle)


    1. A004N4U

      Using a moulding remover B, detach the 2 claws.

    2. Detach the 6 clips.

    3. Remove the console panel and then disconnect the connector.

  11. REMOVE LOWER INSTRUMENT CLUSTER FINISH PANEL


    1. A004R21

      Using a moulding remover B, detach the 2 clips.

    2. A004RIXE01
      Text in Illustration
      *1 w/ Seat Heater System

      Remove the finish panel and then disconnect the connectors.

  12. REMOVE REAR CONSOLE BOX CUP HOLDER


    1. Remove the cup holder.

  13. REMOVE CONSOLE BOX CARPET


    1. Remove the 2 carpets.

  14. REMOVE CONSOLE BOX ASSEMBLY


    1. for Manual Transaxle:

      Remove the 2 screws.

    2. for Automatic Transaxle

      Remove the 4 screws.

    3. Disconnect the connectors.

    4. Remove the 4 bolts and console box.

      A004P3HE05
      *1 for Manual Transaxle:
      *2 for Automatic Transaxle: