FRONT CONSOLE BOX(w/ Console Box Lid) DISASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE BOX BOTTOM PANEL


    1. A004NH8

      Detach the 4 claws and remove the box bottom panel.

  2. REMOVE CONSOLE COMPARTMENT DOOR SUB-ASSEMBLY


    1. A004PYIE02
      Text in Illustration
      *1 Protective Tape

      Put protective tape around the rear console end panel.

    2. Using a moulding remover B, detach the 14 claws and remove the rear console end panel.

      Tech Tips

      The panel is easier to remove by detaching the claws from the bottom to the top.

    3. A004POUE01
      Text in Illustration
      *1 E-Ring
      *2 Shaft

      Remove the 2 E-rings.

    4. Remove the 2 shafts.

    5. Detach the lock and remove the console compartment door sub-assembly.

  3. REMOVE CONSOLE COMPARTMENT DOOR LOCK SUB-ASSEMBLY


    1. A004RWF

      Remove the 2 screws.

    2. Detach the 4 guides and remove the console compartment door lock sub-assembly.

  4. REMOVE REAR CONSOLE ARMREST LID


    1. A004T38E01
      Text in Illustration
      *1 Console Compartment Door Hinge

      Remove the console compartment door hinge from the rear console armrest lid.