POWER OUTLET SOCKET REMOVAL

PROCEDURE

1. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

   Click here

2. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

   Click here

3. REMOVE NO. 3 BOX PANEL

   Click here

4. REMOVE INSTRUMENT PANEL FINISH PANEL END LH

   Click here

5. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for LHD)

   Click here

6. REMOVE INSTRUMENT PANEL FINISH PANEL END RH (for RHD)

   Click here

7. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Manual Transaxle)

   Click here

8. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY (for Automatic Transaxle)

   Click here

9. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Manual Transaxle)

   Click here

10. REMOVE REAR UPPER CONSOLE PANEL SUB-ASSEMBLY (for Automatic Transaxle)

    Click here

11. REMOVE BOX BOTTOM PANEL

    
    

    1. 

       Disconnect the 2 connectors.

    2. 

       Detach the 4 claws and remove the box bottom panel.

12. REMOVE POWER OUTLET SOCKET

    
    

    1. 

       Using a screwdriver, detach the claw and remove the power outlet socket.

       Tech Tips

       Tape the screwdriver tip before use.

13. REMOVE POWER OUTLET SOCKET COVER NO.2

    
    

    1. 

       Detach the 2 claws and remove the power outlet socket cover.