HEATER ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER

    Click here

  2. REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. Remove the windshield wiper motor and link assembly Click here.

  3. REMOVE DIFFERENTIAL PRESSURE SENSOR ASSEMBLY (for DPF)

    Click here

  4. REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY

    Click here

  5. REMOVE AIR DUCT


    1. A004QNM

      Remove the clip and air duct.

  6. REMOVE NO. 1 EXHAUST PIPE SUB-ASSEMBLY


    1. A004PV1

      Remove the 3 nuts and No. 1 exhaust pipe sub-assembly.

    2. Remove the gasket.

  7. REMOVE HEATER WITH EXHAUST PIPE ASSEMBLY

    A004RKF

    1. Disconnect the connector.

    2. Remove the 3 clips.

    3. Detach the clamp.

    4. A004T1S

      Remove the 3 nuts and heater with exhaust pipe assembly.