HEATER FUEL PUMP INSTALLATION

PROCEDURE


  1. INSTALL PIPING INSULATOR


    1. Install the 2 piping insulators as shown in the illustration.

      A004PCFE02
      Text in Illustration
      *a Interior Side *b Front Side
      *c Upper Side *d Lower Side
      *e Slit *f 90°

  2. INSTALL HEATER PUMP ASSEMBLY


    1. Install the heater pump assembly with the nut.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    2. Connect the fuel hose and attach the 2 clips, as shown in the illustration.

    3. Connect the connector.

      A004U4GE01
      Text in Illustration
      *1 Paint Mark *2 0 to -3 mm (0 to -1.181 in.)

  3. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY

    Click here

  4. INSTALL DIFFERENTIAL PRESSURE SENSOR ASSEMBLY (for DPF)

    Click here

  5. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY


    1. Install the windshield wiper motor and link assembly Click here.

  6. INSTALL NO. 1 ENGINE COVER

    Click here