HEATER FUEL PUMP INSTALLATION

PROCEDURE


  1. INSTALL HEATER PUMP ASSEMBLY


    1. Install the heater pump assembly with the nut.

      Torque:
      7.5 N*m  { 76 kgf*cm, 66 in.*lbf }

    2. Connect the fuel hose and attach the 2 clips, as shown in the illustration.

    3. Connect the connector.

      A004U4GE01
      Text in Illustration
      *1 Paint Mark *2 0 to -3 mm (0 to -1.181 in.)

  2. INSTALL OUTER COWL TOP PANEL SUB-ASSEMBLY

    Click here

  3. INSTALL DIFFERENTIAL PRESSURE SENSOR ASSEMBLY (for DPF)

    Click here

  4. INSTALL WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

    Click here

  5. INSTALL COWL TOP VENTILATOR LOUVER LH

    Click here

  6. INSTALL COWL TOP VENTILATOR LOUVER RH

    Click here

  7. INSTALL HOOD TO COWL TOP SEAL

    Click here

  8. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY RH

    Click here

  9. INSTALL FRONT WIPER ARM AND BLADE ASSEMBLY LH

    Click here

  10. INSTALL FRONT WIPER ARM HEAD CAP

    Click here

  11. INSTALL NO. 1 ENGINE COVER

    Click here