COMPRESSOR REMOVAL

PROCEDURE


  1. REMOVE NO. 1 ENGINE COVER

    Click here

  2. REMOVE RADIATOR SUPPORT OPENING COVER

    Click here

  3. RECOVER REFRIGERANT FROM REFRIGERATION SYSTEM

    Click here

  4. REMOVE FRONT LOWER BUMPER ABSORBER

    Click here

  5. REMOVE NO. 1 ENGINE UNDER COVER

    Click here

  6. REMOVE REAR ENGINE UNDER COVER RH

    Click here

  7. REMOVE FRONT SUSPENSION MEMBER REINFORCEMENT RH

    Click here

  8. REMOVE FAN AND GENERATOR V BELT


    1. for 1AD-FTV:

      Remove the fan and generator V belt Click here.

    2. for 2AD-FHV:

      Remove the fan and generator V belt Click here.

    3. for 2AD-FTV:

      Remove the fan and generator V belt Click here.

  9. DISCONNECT NO. 3 AIR HOSE


    1. A004RCW

      Loosen the hose clamp and disconnect the No. 3 air hose.

  10. DISCONNECT DISCHARGE HOSE SUB-ASSEMBLY


    1. A004O2Q

      Remove the bolt and disconnect the discharge hose sub-assembly from the compressor assembly with pulley.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

    2. Remove the O-ring from the discharge hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  11. DISCONNECT SUCTION HOSE SUB-ASSEMBLY


    1. A004U19

      Remove the bolt and disconnect the suction hose sub-assembly from the compressor assembly with pulley.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

    2. Remove the O-ring from the suction hose sub-assembly.

      Note

      Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.

  12. REMOVE COMPRESSOR ASSEMBLY WITH PULLEY

    A004PEK

    1. Disconnect the connector.

    2. A004Q0H

      Remove the 2 bolts and 2 nuts.

    3. A004RCD

      Using a "TORX" socket wrench (E8), remove the 2 stud bolts and compressor assembly with pulley.