COMBUSTION TYPE POWER HEATER SYSTEM, Diagnostic DTC:051

DTC Code DTC Name
051 Cold Blow Time Exceeded

DESCRIPTION

DTC Code DTC Detection Condition Trouble Area
051 After the heater assembly is turned on, the temperature of the flame sensor is 90°C (194°F) or more for 600 seconds or more before the heater ignites.

  • No. 1 exhaust pipe sub-assembly

  • No. 2 exhaust pipe sub-assembly

  • Heater assembly

CAUTION / NOTICE / HINT

Tech Tips

Before performing the following inspection, attempt to restart the heater assembly. If the heater assembly is successfully started, confirm that DTC 051 is not output. If DTC 051 is not output, stop troubleshooting because it can be concluded that the system has returned to normal.

PROCEDURE


  1. CHECK EXHAUST PIPE SUB-ASSEMBLY


    1. Check that hot exhaust gas is coming out of the exhaust pipes.

      CAUTION:


      • The exhaust pipes and muffler are extremely hot. Wear protective gloves and do not touch these parts with bare hands.

      • When performing the inspection, wear a face mask to prevent direct inhalation of exhaust gas.

      Result
      Result Proceed to
      There is no problem with the exhaust pipes. A
      There is a problem with the exhaust pipe (No. 1 exhaust pipe sub-assembly). B
      There is a problem with the exhaust pipe (No. 2 exhaust pipe sub-assembly). C

    A

    REPLACE HEATER ASSEMBLY Click here

    B

    CLEAN OR REPLACE NO. 1 EXHAUST PIPE SUB-ASSEMBLY Click here

    C

    CLEAN OR REPLACE NO. 2 EXHAUST PIPE SUB-ASSEMBLY Click here