REAR SEAT OUTER BELT ASSEMBLY(for Wagon) INSPECTION

PROCEDURE


  1. INSPECT REAR SEAT 3 POINT TYPE BELT ASSEMBLY

    A004NFUE02
    Text in Illustration
    *a Unlock
    *b Lock
    *c 45°

    1. Before installing the rear 3 point type belt assembly, check the ELR function.


      1. When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks. If the result is not as specified, replace the When the inclination of the retractor is 15° or less, check that the belt can be pulled from the retractor. When the inclination of the retractor is over 45°, check that the belt locks. If the result is not as specified, replace the rear 3 point type belt assembly.