SEAT BELT WARNING LIGHT(for Rear) INSPECTION

PROCEDURE


  1. INSPECT TELLTALE LIGHT ASSEMBLY


    1. A004SXVE02
      Text in Illustration
      *a

      Component without harness connected

      (Upper Console Panel Sub-assembly)
      *b Rear Seat LH Indicator
      *c Rear Center Seat Indicator
      *d Rear Seat RH Indicator

      Apply battery voltage to the upper console panel sub-assembly connector, and check that the telltale light assembly indicator illuminates.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 3 (B)

      Battery negative (-) → Terminal 12 (RLID)

      		 Rear seat LH indicator illuminates

      Battery positive (+) → Terminal 3 (B)

      Battery negative (-) → Terminal 11 (RCID)

      		 Rear center seat indicator illuminates

      Battery positive (+) → Terminal 3 (B)

      Battery negative (-) → Terminal 10 (RRID)

      		 Rear seat RH indicator illuminates

      If the result is not as specified, replace the upper console panel sub-assembly.