SEAT BELT WARNING LIGHT(for Rear) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. REMOVE NO. 1 CONSOLE UPPER PANEL GARNISH

    Click here

  2. REMOVE NO. 2 CONSOLE UPPER PANEL GARNISH

    Click here

  3. REMOVE SHIFT LEVER KNOB SUB-ASSEMBLY

    Click here

  4. REMOVE LOWER NO. 2 INSTRUMENT PANEL FINISH PANEL

    Click here

  5. REMOVE LOWER NO. 1 INSTRUMENT PANEL FINISH PANEL

    Click here

  6. REMOVE NO. 3 BOX PANEL

    Click here

  7. REMOVE UPPER REAR CONSOLE PANEL SUB-ASSEMBLY

    Click here

  8. REMOVE UPPER CONSOLE PANEL SUB-ASSEMBLY


    1. A004MSG

      Remove the 2 clips.

    2. Pull the upper console panel sub-assembly towards the rear of the vehicle to detach the 3 clips and remove it.

    3. A004RX6

      Disconnect the connector.