FRONT SEATBACK HEATER(for Manual Seat) INSPECTION

PROCEDURE


  1. INSPECT FRONT SEATBACK HEATER ASSEMBLY LH


    1. Check the front seatback heater assembly LH.


      1. A004Q9IE02
        Text in Illustration
        *a

        Component without harness connected

        (Front Seatback Heater Assembly LH)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 20°C (68°F) 0.61 to 0.74 Ω

        If the result is not as specified, replace the front seatback heater assembly LH.

  2. INSPECT FRONT SEATBACK HEATER ASSEMBLY RH


    1. Check the front seatback heater assembly RH.


      1. A004Q9IE02
        Text in Illustration
        *a

        Component without harness connected

        (Front Seatback Heater Assembly RH)

        Measure the resistance according to the value(s) in the table below.

        Standard Resistance
        Tester Connection Condition Specified Condition
        1 - 2 20°C (68°F) 0.61 to 0.74 Ω

        If the result is not as specified, replace the front seatback heater assembly RH.