FRONT POWER SEAT MOTOR ASSEMBLY(for Reclining) REMOVAL

CAUTION / NOTICE / HINT

Note

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE RECLINING POWER SEAT SWITCH KNOB

    Click here

  3. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    Click here

  4. REMOVE FRONT SEAT CUSHION SHIELD LH WITH FRONT SEAT NO. 1 INNER CUSHION SHIELD LH

    Click here

  5. REMOVE FRONT POWER SEAT SWITCH LH

    Click here

  6. REMOVE SEAT SLIDE POSITION SENSOR PROTECTOR (for Driver Side)

    Click here

  7. REMOVE FRONT SEAT INNER BELT ASSEMBLY LH (for Driver Side)

    Click here

  8. REMOVE FRONT SEAT INNER BELT ASSEMBLY RH (for Front Passenger Side)

    Click here

  9. REMOVE FRONT SEAT INNER CUSHION SHIELD LH

    Click here

  10. REMOVE SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD

    Click here

  11. REMOVE SEPARATE TYPE FRONT SEATBACK COVER

    Click here

  12. REMOVE SEPARATE TYPE FRONT SEATBACK PAD

    Click here

  13. REMOVE POWER SEAT MOTOR ASSEMBLY (for Reclining)


    1. A004NTG

      for Driver Side:

      Disconnect the connector.

    2. A004U9H

      Disconnect the connector.

    3. A004U7F

      Detach the 8 hooks and remove the seatback spring.

    4. A004O8X

      Push in the inner reclining rod.

    5. A004RN3

      Push in the inner reclining rod and remove the reclining rod assembly.

    6. A004P68

      Remove the bolt and power seat motor assembly.