FRONT POWER SEAT MOTOR ASSEMBLY(for Reclining) REMOVAL

CAUTION / NOTICE / HINT

Note

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE FRONT SEAT ASSEMBLY

    Click here

  2. REMOVE RECLINING POWER SEAT SWITCH KNOB

    Click here

  3. REMOVE SLIDE AND VERTICAL POWER SEAT SWITCH KNOB

    Click here

  4. REMOVE FRONT SEAT CUSHION SHIELD LH WITH FRONT SEAT NO. 1 INNER CUSHION SHIELD LH

    Click here

  5. REMOVE FRONT SEAT INNER CUSHION SHIELD LH

    Click here

  6. REMOVE SEPARATE TYPE FRONT SEATBACK COVER

    Click here

  7. REMOVE SEPARATE TYPE FRONT SEATBACK PAD


    1. A004O8D

      Remove the separate type front seatback pad.

  8. REMOVE POWER SEAT MOTOR ASSEMBLY (for Reclining)


    1. A004QQF

      for Driver Side:

      Disconnect the 2 connectors.

    2. A004U71

      for Front Passenger Side:

      Disconnect the connector.

    3. A004QIW

      Detach the 8 hooks and remove the seatback spring.

    4. A004S8W

      Push in the inner reclining rod.

    5. A004RN3

      Push in the inner reclining rod and remove the reclining rod assembly.

    6. A004U6V

      Remove the bolt and power seat motor assembly.