REAR SEAT ASSEMBLY(for Wagon) INSTALLATION

PROCEDURE


  1. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY LH

    A004RTT

    1. Install the seatback hinge with the bolt.

      Torque:
      18 N*m  { 184 kgf*cm, 13 ft.*lbf }

  2. INSTALL REAR SEATBACK HINGE SUB-ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL REAR CENTER SEATBACK HINGE SUB-ASSEMBLY

    A004PND

    1. Install the center seatback hinge with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

  4. INSTALL REAR SEAT CUSHION LOCK HOOK

    A004N0L

    1. Attach the 4 claws to install the 2 lock hooks.

  5. INSTALL NO. 1 QUARTER WHEEL HOUSE GUSSET SUB-ASSEMBLY

    A004NN0

    1. Align the 2 claws with the 2 gusset positioning holes w and install the gusset with the 6 bolts.

      Torque:
      44 N*m  { 449 kgf*cm, 32 ft.*lbf }

  6. INSTALL REAR SEATBACK ASSEMBLY LH

    A004TDY

    1. Install the seatback with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    2. Attach the carpet with the 2 clips.

  7. INSTALL REAR SEATBACK ASSEMBLY RH

    A004QXG

    1. Install the seatback with the 2 bolts.

      Torque:
      37 N*m  { 377 kgf*cm, 27 ft.*lbf }

    2. Attach the carpet with the 2 clips.

    3. A004UDHE03
      Text in Illustration
      *1 Protruding Part

      Connect the rear center seat outer belt anchor with the bolt.

      Torque:
      41 N*m  { 418 kgf*cm, 30 ft.*lbf }

      Note

      Do not allow the anchor part of the rear center seat outer belt to overlap the protruding parts.

  8. INSTALL REAR SIDE SEATBACK ASSEMBLY LH


    1. A004RMW

      Install the claw as shown in the illustration.

    2. Install the side seatback with the bolt.

      Torque:
      7.8 N*m  { 80 kgf*cm, 69 in.*lbf }
    3. A004RC9E02
      Text in Illustration
      *1 Protruding Part

      Install the rear seat 3 point type belt anchor with the bolt.

      Torque:
      41 N*m  { 418 kgf*cm, 30 ft.*lbf }

      Note

      Do not allow the anchor part of the rear seat 3 point type belt to overlap the protruding parts of the floor panel.

    4. Install the seat belt to the belt guide.

    5. Attach the claw to close the cap of the rear seat shoulder belt guide.

    6. Check if the ELR locks.

      Note

      The check should be performed with the outer belt assembly installed.


      1. With the belt assembly installed, check that the belt locks when it is pulled out quickly.

  9. INSTALL REAR SIDE SEATBACK ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  10. INSTALL REAR BENCH TYPE SEAT CUSHION ASSEMBLY

    A004Q82

    1. Attach the 2 rear hooks of the seat cushion to the seatback.

    2. Attach the 2 front hooks to install the seat cushion.

    3. Confirm that the seat cushion is firmly installed.

      Note

      When installing the seat cushion, make sure the seat belt buckle is not under the seat cushion.