CAMERA HEATER REMOVAL

PROCEDURE


  1. REMOVE PRE-CRASH SAFETY CITY SENSOR

    Click here

  2. REMOVE PRE-CRASH SAFETY CITY HEATER WIRE


    1. A004PPPE01
      Text in Illustration
      *a Clamp
      *b Guide

      Detach the clamp and 2 guides.

    2. A004TKM

      Disconnect the 2 connectors to remove the pre-crash safety city heater wire.

  3. REMOVE PRE-CRASH SAFETY CITY HEATER

    Tech Tips


    • Perform this step only when replacement of the pre-crash safety city heater is necessary, because it is a non-reusable part.

    • If the pre-crash safety city heater has been removed, replace it with a new one.


    1. A004O82

      Cut off the part shaded in the illustration.

    2. A004R70

      Using a pliers, and remove the pre-crash safety city heater as shown in the illustration.