PRE-CRASH SAFETY SYSTEM CUSTOMIZE PARAMETERS

PROCEDURE

1. CUSTOMIZE PRE-CRASH SAFETY SYSTEM

   Note

   
   

   • When the customer requests a change in a function, first make sure that the function can be customized.

   • Record the current settings before customizing.

   Tech Tips

   The following items can be customized.

   
   

   1. Customizing with the GTS.

      Tech Tips

      The default settings of the PCS function and PCS warning sensitivity used when the ignition switch is turned to ON can be changed.

      
      

      1. Connect the GTS to the DLC3.

      2. Turn the ignition switch to ON.

      3. Turn the GTS on.

      4. Enter the following menus: Chassis / PCS/LDA/RSA/LVN / Utility / Customize.

      5. Select the setting by referring to the table below.

         Sensor

         Display	Default	Content	Setting	Relevant ECU
         PCS Operation State Retention Setting	OFF	Displays availability of PCS operation retention setting when turning ignition switch from off to ON	OFF or ON	Pre-crash safety city sensor
         PCS Alarm Activation Distance Retention Setting 1	OFF	Displays availability of PCS alarm activation distance retention setting when turning pre-crash system cancel switch assembly from off to on	OFF or ON
         PCS Alarm Activation Distance Retention Setting 2	ON	Displays availability of PCS alarm activation distance retention setting when turning ignition switch from off to ON with pre-crash system cancel switch assembly on	OFF or ON
         PCS Alarm Activation Distance Retention Setting 3	OFF	Displays availability of PCS alarm activation distance retention setting when turning ignition switch from off to ON with pre-crash system cancel switch assembly off	OFF or ON