PRE-CRASH SAFETY SYSTEM, Diagnostic DTC:C1A46

DTC Code DTC Name
C1A46 Yaw Rate Sensor

DESCRIPTION

The skid control ECU receives vehicle stability signals from the yaw rate sensor and sends the signals to the driving support ECU and ECM. If the skid control ECU detects that the yaw rate sensor is malfunctioning, the skid control ECU and the yaw rate sensor send a malfunction signal to the driving support ECU and stores DTC C1A46. Also, when DTC C1A46 is stored, the skid control ECU stores DTC C1234/34 at the same time.

DTC Code DTC Detection Condition Trouble Area
C1A46 While the vehicle speed is 5 km/h (3 mph) or more, a malfunction signal from the skid control ECU and yaw rate sensor is detected for 1 second.

  • Vehicle stability control system

  • Driving support ECU

PROCEDURE


  1. CHECK FOR DTC (VEHICLE STABILITY CONTROL SYSTEM)


    1. Check for DTCs Click here.

      OK
      DTC C1234/34 is not output.

    NG

    GO TO VEHICLE STABILITY CONTROL SYSTEM Click here

    OK

  2. CHECK FOR DTC


    1. Clear the DTCs Click here.

    2. Check for DTCs Click here.

      OK
      DTC C1A46 is not output.
      Result
      Result Proceed to
      OK A
      NG (for LHD) B
      NG (for RHD) C

    A

    USE SIMULATION METHOD TO CHECK Click here

    B

    REPLACE DRIVING SUPPORT ECU Click here

    C

    REPLACE DRIVING SUPPORT ECU Click here