REAR AIRBAG SENSOR(for Sedan) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  2. REMOVE BENCH TYPE REAR SEAT CUSHION ASSEMBLY

    Click here

  3. REMOVE REAR SIDE SEATBACK ASSEMBLY LH

    Click here

  4. REMOVE REAR AIRBAG SENSOR LH


    1. A004QRX

      Remove the nut and rear airbag sensor.

    2. Disconnect the connector.