FRONT SEAT SIDE AIRBAG ASSEMBLY INSTALLATION

CAUTION / NOTICE / HINT

CAUTION:

Wear protective gloves. Sharp areas on the parts may injure your hands.

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL FRONT SEAT AIRBAG ASSEMBLY LH


    1. Install front seat air bag assembly LH with 2 new nuts.

      Torque:
      6.0 N*m  { 61 kgf*cm, 53 in.*lbf }

    2. Attach the 4 harness clamps and connect the connector clamp.

  2. INSTALL SEPARATE TYPE FRONT SEATBACK PAD (for Manual Seat)

    Click here

  3. INSTALL SEPARATE TYPE FRONT SEATBACK PAD (for Power Seat)

    Click here

  4. INSTALL SEPARATE TYPE FRONT SEATBACK COVER (for Manual Seat)

    Click here

  5. INSTALL SEPARATE TYPE FRONT SEATBACK COVER (for Power Seat)

    Click here

  6. INSTALL FRONT SEAT INNER CUSHION SHIELD LH

    Click here

  7. INSTALL FRONT SEAT CUSHION SHIELD LH (for Manual Seat)

    Click here

  8. INSTALL FRONT SEAT CUSHION SHIELD LH WITH FRONT SEAT NO. 1 INNER CUSHION SHIELD LH (for Power Seat)

    Click here

  9. INSTALL SLIDE & VERTICAL POWER SEAT SWITCH KNOB (for Power Seat)

    Click here

  10. INSTALL RECLINING POWER SEAT SWITCH KNOB (for Power Seat)

    Click here

  11. INSTALL RECLINING ADJUSTER RELEASE HANDLE LH (for Manual Seat)

    Click here

  12. INSTALL VERTICAL ADJUSTING HANDLE LH (for Manual Seat Driver Side)

    Click here

  13. INSTALL VERTICAL SEAT ADJUSTER KNOB CAP (for Manual Seat Driver Side)

    Click here

  14. INSTALL FRONT SEAT ASSEMBLY

    for Manual Seat: Click here

    for Power Seat: Click here