FRONT PASSENGER AIRBAG ASSEMBLY REMOVAL

PROCEDURE


  1. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY


    1. Remove the upper instrument panel Click here.

  2. REMOVE NO. 3 HEATER TO REGISTER DUCT

    Click here

  3. REMOVE NO. 2 INSTRUMENT PANEL WIRE


    1. A004U13E01
      Text in Illustration
      *a Connector Lock
      A004PF6 Protective Tape

      Using a screwdriver, release the connector lock and disconnect the airbag connector.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

      Tech Tips

      Tape the screwdriver tip before use.

    2. Detach the wire harness clamp and remove the No. 2 instrument panel wire.

  4. REMOVE INSTRUMENT PANEL PASSENGER AIRBAG ASSEMBLY


    1. A004N3H

      Remove the 2 screws.

    2. Detach the 5 hooks and raise the instrument panel passenger airbag assembly in the direction indicated by the arrow shown in the illustration.

    3. A004RZE

      Detach the 5 hooks and remove the instrument panel passenger airbag assembly.