KNEE AIRBAG ASSEMBLY(for Driver Side) REMOVAL

CAUTION / NOTICE / HINT

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    CAUTION:

    Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here

  4. REMOVE LOWER STEERING COLUMN COVER

    Click here

  5. REMOVE LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY


    1. A004OYD

      Remove the 4 bolts.

    2. A004P0R

      Detach the 7 claws and remove the lower No. 1 instrument panel airbag assembly.

    3. A004OQTE01

      Detach the 2 claws and disconnect the DLC3.

    4. Using a screwdriver, release the connector lock and disconnect the airbag connector.

      Text in Illustration
      *a Connector Lock
      A004PF6 Protective Tape

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

      Tech Tips

      Tape the screwdriver tip before use.