CURTAIN SHIELD AIRBAG ASSEMBLY(for Sedan) INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. INSTALL CURTAIN SHIELD AIRBAG ASSEMBLY LH


    1. Install the curtain shield airbag and 5 spacers with 5 new clips and the 4 bolts.

      A004RY4
      Torque:
      14 N*m  { 143 kgf*cm, 10 ft.*lbf }

      Note

      Do not twist the curtain shield airbag when installing it.

    2. A004QT1

      Connect the connector.

      Note

      When handling the airbag connector, take care not to damage the airbag wire harness.

  2. INSTALL ROOF HEADLINING ASSEMBLY


    1. Install the roof headlining Click here.