GLOVE BOX LIGHT INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL GLOVE BOX LIGHT ASSEMBLY


    1. A004PPW

      Attach the 2 claws to install the glove box light assembly.

    2. Connect the connector.

  2. INSTALL UPPER INSTRUMENT PANEL SUB-ASSEMBLY

    Click here

  3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  4. CHECK SRS WARNING LIGHT

    Click here