PERSONAL LIGHT(for Center) INSPECTION

PROCEDURE


  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY


    1. A004QR9E01
      Text in Illustration
      *a

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly)

      Apply battery voltage to the connector and check the LED illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 2 (+B)

      Battery negative (-) → Terminal 1 (GND)

      		 Light illuminates

      If the result is not as specified, replace the No. 1 interior illumination light assembly.