PERSONAL LIGHT(for RH Side) INSPECTION

PROCEDURE


  1. INSPECT NO. 1 INTERIOR ILLUMINATION LIGHT ASSEMBLY RH


    1. A004QR9E01
      Text in Illustration
      *1

      Component without harness connected

      (No. 1 Interior Illumination Light Assembly RH)

      Apply battery voltage to the connector and check the LED illumination condition.

      OK
      Measurement Condition Specified Condition

      Battery positive (+) → Terminal 2 (+B)

      Battery negative (-) → Terminal 1 (GND)

      		 Light illuminates

      If the result is not as specified, replace the interior illumination light assembly.