ENGINE HOOD COURTESY SWITCH INSTALLATION

PROCEDURE


  1. INSTALL HOOD LOCK ASSEMBLY


    1. A004TVEE01
      Text in Illustration
      *1 MP grease

      Apply MP grease to the sliding areas of the lock.

    2. A004NMV

      Connect the hood lock control cable.

    3. A004SIG

      Connect the connector.

    4. Install the hood lock with the 3 bolts.

      Torque:
      5.5 N*m  { 57 kgf*cm, 49 in.*lbf }

  2. INSTALL NO. 1 WATER HOSE CLAMP BRACKET

    Click here

  3. INSTALL RADIATOR SUPPORT OPENING COVER

    Click here