| DTC Code | DTC Name |
|---|---|
| HOW TO PROCEED WITH TROUBLESHOOTING |
CAUTION / NOTICE / HINT
Tech Tips
Use these procedures to troubleshoot the engine immobiliser system.
*: Using the intelligent tester.
PROCEDURE
VEHICLE BROUGHT TO WORKSHOP
| Result | ||
|---|---|---|
|
| NEXT |
|
INSPECT BATTERY VOLTAGE
| Standard Voltage |
|---|
| 11 to 14 V |
If the voltage is below 11 V, recharge or replace the battery before proceeding.
| Result | ||
|---|---|---|
|
| NEXT |
|
CRANK ENGINE FOR MORE THAN 10 SECONDS
| Result | ||
|---|---|---|
|
| NEXT |
|
CHECK FOR DTC*
Check for DTCs and note any codes that are output.
Clear the DTCs.
Recheck for DTCs. Try to duplicate the DTC (ECD system and engine immobiliser system) by reproducing the symptoms indicated by the DTC.
| Result | ||||||||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
|
| B |
|
GO TO ECD SYSTEM Click here |
| C |
|
GO TO ECD SYSTEM Click here |
| D |
|
GO TO ECD SYSTEM Click here |
| E |
|
GO TO ECD SYSTEM Click here |
| F |
|
GO TO ECD SYSTEM Click here |
| G |
|
GO TO DIAGNOSTIC TROUBLE CODE CHART Click here |
| A |
|
PROBLEM SYMPTOMS TABLE
Refer to Problem Symptoms Table.
| Result | ||||||
|---|---|---|---|---|---|---|
|
| B |
|
GO TO STEP 7 Click here |
| A |
|
OVERALL ANALYSIS AND TROUBLESHOOTING*
Data List/Active Test.
Terminals of ECU.
| Result | ||
|---|---|---|
|
| NEXT |
|
ADJUST, REPAIR OR REPLACE
| Result | ||
|---|---|---|
|
| NEXT |
|
CONFIRMATION TEST
| Result | ||
|---|---|---|
|
| NEXT |
|
END |