ENTRY AND START SYSTEM(for Entry Function) DATA LIST / ACTIVE TEST


  1. READ DATA LIST

    Tech Tips

    Using the intelligent tester to read the Data List allows the values or states of switches, sensors, actuators and other items to be read without removing any parts. This non-intrusive inspection can be very useful because intermittent conditions or signals may be discovered before parts or wiring is disturbed. Reading the Data List information early in troubleshooting is one way to save diagnostic time.

    Note

    In the table below, the values listed under "Normal Condition" are reference values. Do not depend solely on these reference values when deciding whether a part is faulty or not.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / (desired system) / Data List.

    5. According to the display on the intelligent tester, read the Data List.

      Entry&Start
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      Power Save Cnt 9 Days Power save counter - 9 days / Min: 0, Max: 225 Within range from 0 to 225 -
      Power Save Cnt 14 Days Power save counter - 14 days / Min: 0, Max: 225 Within range from 0 to 225 -
      Power Save Cnt 30 Days Power save counter - 30 days / Min: 0, Max: 225 Within range from 0 to 225 -
      Unmatched Vehicle-ID No communication condition between vehicle and electrical key transmitter (vehicle-ID) / Yes or No

      Yes: Key ID code not matched to vehicle

      No: Key ID code matched to vehicle

      		 -
      No Response No communication condition between vehicle and electrical key transmitter (response) / Yes or No

      Yes: Key ID code not matched to vehicle

      No: Key ID code matched to vehicle

      		 -
      Unmatch Code or Form No communication condition between vehicle and electrical key transmitter (response code and format) / Yes or No

      Yes: Key ID code not matched to vehicle

      No: Key ID code matched to vehicle

      		 -
      Key Low Battery Key low battery / Yes or No

      Yes: Key battery voltage low

      No: Key battery voltage normal

      		 -
      ID Code Difference(Resp) No communication condition between vehicle and electrical key transmitter (ID code) / Yes or No

      Yes: Key ID code not matched to vehicle

      No: Key ID code matched to vehicle

      		 -
      C Code Difference No communication condition between vehicle and electrical key transmitter (challenge code) / Yes or No

      Yes: Key ID code not matched to vehicle

      No: Key ID code matched to vehicle

      		 -
      Door Unlock Mode Door unlock mode / All, Each, D_Door, Side Mode status displayed -
      Auto Entry Cancel SW Entry door lock function cancel / ON or OFF Mode status displayed -
      Trunk Open Mode Luggage compartment door open mode with vehicle locked / ON or OFF Customization status displayed -
      Ignition Available Area Ignition available area / Front or All Customization status displayed -
      D-Door Touch Sensor Driver side door touch sensor / ON or OFF

      ON: Driver side door sensor touched

      OFF: Driver side door sensor not touched

      		 -
      D-Door Trigger Switch Driver side door outside handle lock switch / ON or OFF

      ON: Driver side door outside handle lock switch touched

      OFF: Driver side door outside handle lock switch not touched

      		 -
      P-Door Touch Sensor Front passenger side door touch sensor / ON or OFF

      ON: Front passenger side door sensor touched

      OFF: Front passenger side door sensor not touched

      		 -
      P-Door Trigger Switch Front passenger side door outside handle lock switch / ON or OFF

      ON: Front passenger side door outside handle lock switch touched

      OFF: Front passenger side door outside handle lock switch not touched

      		 -
      Tr/B-Door Lock SW Luggage compartment door*1 or back door*2 lock switch / ON or OFF

      ON: Luggage compartment door*1 or back door*2 lock switch pushed

      OFF: Luggage compartment door*1 or back door*2 lock switch not pushed

      		 -
      Tr/B-Door Unlock SW Luggage compartment door*1 or back door*2 unlock switch / ON or OFF

      ON: Luggage compartment door*1 or back door*2 unlock switch pushed

      OFF: Luggage compartment door*1 or back door*2 unlock switch not pushed

      		 -

      *1: for Sedan

      *2: for Wagon

      Main Body
      Tester Display Measurement Item/Range Normal Condition Diagnostic Note
      IG SW Engine switch on (IG) / ON or OFF

      ON: Engine switch on (IG)

      OFF: Engine switch off

      		 -
      ACC SW Engine switch on (ACC) / ON or OFF

      ON: Engine switch on (ACC)

      OFF: Engine switch off

      		 -
      D Door Courtesy SW Driver side door courtesy light switch signal / ON or OFF

      ON: Driver side door opened

      OFF: Driver side door closed

      		 -
      P Door Courtesy SW Front passenger side door courtesy light switch signal / ON or OFF

      ON: Front passenger side door opened

      OFF: Front passenger side door closed

      		 -
      RR Door Courtesy SW Rear RH side door courtesy light switch signal / ON or OFF

      ON: Rear side door RH opened

      OFF: Rear side door RH closed

      		 -
      RL Door Courtesy SW Rear LH side door courtesy light switch signal / ON or OFF

      ON: Rear side door LH opened

      OFF: Rear side door LH closed

      		 -
      D-Door Lock Pos SW Driver side door lock position switch signal / ON or OFF

      ON: Driver side door unlocked

      OFF: Driver side door locked

      		 -
      P-Door Lock Pos SW Front passenger side door lock position switch signal / ON or OFF

      ON: Front passenger side door unlocked

      OFF: Front passenger side door locked

      		 -
      RR-Door Lock Pos SW Rear RH side door lock position switch signal / ON or OFF

      ON: Rear RH side door unlocked

      OFF: Rear RH side door locked

      		 -
      RL-Door Lock Pos SW Rear LH side door lock position switch signal / ON or OFF

      ON: Rear LH side door unlocked

      OFF: Rear LH side door locked

      		 -
      Back Door Handle SW Luggage compartment door*1 or back door*2 opener switch / ON or OFF

      ON: Luggage compartment door*1 or back door*2 opener switch pushed

      OFF: Luggage compartment door*1 or back door*2 opener switch not pushed

      		 -
      Back Door Courtesy SW Luggage compartment door*1 or back door*2 courtesy light switch signal / ON or OFF

      ON: Luggage compartment door*1 or back door*2 opened

      OFF: Luggage compartment door*1 or back door*2 closed

      		 -

      *1: for Sedan

      *2: for Wagon

  2. PERFORM ACTIVE TEST

    Tech Tips

    Using the intelligent tester to perform Active Tests allows relays, VSVs, actuators and other items to be operated without removing any parts. This non-intrusive functional inspection can be very useful because intermittent operation may be discovered before parts or wiring is disturbed. Performing Active Tests early in troubleshooting is one way to save diagnostic time. Data List information can be displayed while performing Active Tests.


    1. Connect the intelligent tester to the DLC3.

    2. Turn the engine switch on (IG).

    3. Turn the intelligent tester on.

    4. Enter the following menus: Body / Entry&Start / Active Test.

    5. According to the display on the intelligent tester, perform the Active Test.

      Entry&Start
      Tester Display Test Part Control Range Diagnostic Note
      Overhead Tuner Power Supply ON Door control receiver ON or OFF -
      Inside Luggage Tuner Power Supply On Door control receiver ON or OFF -