BACK DOOR LOCK(for Wagon) INSTALLATION

PROCEDURE

1. INSTALL BACK DOOR LOCK ASSEMBLY

   Note

   
   

   • When installing a new back door lock assembly, if there is any tape stuck to it, remove the tape.

   • When installing a new back door lock assembly, if there are any strings attached to it, cut the strings off.

   
   

   1. 

      Connect the connector.

   2. Install the back door lock assembly with the 3 bolts.

      Torque:

      13 N*m  { 133 kgf*cm, 10 ft.*lbf }

2. INSTALL BACK DOOR TRIM BOARD ASSEMBLY

   Click here

3. INSTALL BACK DOOR SIDE GARNISH RH

   Click here

4. INSTALL BACK DOOR SIDE GARNISH LH

   Click here

5. INSTALL UPPER BACK DOOR TRIM PANEL ASSEMBLY

   Click here