TRANSMITTER BATTERY(w/o Entry and Start System) INSTALLATION

PROCEDURE


  1. INSTALL TRANSMITTER BATTERY

    Note

    Take extra care when handling these precision electronic components.


    1. A004NFL

      Install the battery (lithium battery: CR2016) with the positive (+) side facing upward as shown in the illustration.

      Note


      • Be careful not to bend the transmitter battery electrode during insertion.

      • Keep the transmitter cover interior free of dust and oil.

    2. A004NAF

      Install the cover.

  2. INSTALL DOOR CONTROL TRANSMITTER MODULE

    A004SRE

  3. INSTALL TRANSMITTER HOUSING COVER


    1. A004QB0

      Install the transmitter housing cover to the transmitter housing case.

    2. Check that the transmitter LED illuminates 3 times when a switch is pressed 3 times.

      OK
      Transmitter LED illuminates 3 times when switch is pressed 3 times.