BATTERY CURRENT SENSOR REMOVAL

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. REMOVE BATTERY CURRENT SENSOR ASSEMBLY

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.


    1. A004T3A

      Remove the nut.

    2. Remove the battery current sensor and No. 3 engine wire from the negative (-) battery terminal.

    3. A004QOAE01

      Disconnect the connector from the battery current sensor.

    4. Remove the battery current sensor from the No. 3 engine wire.

      Text in Illustration
      *1 No. 3 Engine Wire