INSTRUMENT PANEL SPEAKER(for 11 Speakers) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. PRECAUTION

    Note

    After turning the ignition switch off, waiting time may be required before disconnecting the cable from the battery terminal. Therefore, make sure to read the disconnecting the cable from the battery terminal notice before proceeding with work Click here.

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

    Note

    When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.

  3. REMOVE UPPER INSTRUMENT PANEL SUB-ASSEMBLY


    1. Remove the upper instrument panel Click here.

  4. REMOVE FRONT NO. 2 SPEAKER ASSEMBLY


    1. A004OND

      Detach the clamp.

    2. Remove the 2 screws and speaker.

      Note

      Do not touch the cone part of the speaker.

  5. REMOVE FRONT NO. 3 SPEAKER ASSEMBLY


    1. A004N25

      Detach the clamp.

    2. Remove the 2 screws and speaker.

      Note

      Do not touch the cone part of the speaker.