REAR BUMPER(for Wagon) REASSEMBLY

CAUTION / NOTICE / HINT

Tech Tips

When installing the rear bumper pad, heat the rear bumper cover surface using a heat light.

Standard
Item Temperature
Rear Bumper Cover 20 to 30°C (68 to 86°F)

Note

Do not heat the rear bumper cover excessively.

PROCEDURE


  1. INSTALL REFLEX REFLECTOR ASSEMBLY LH

    Click here

  2. INSTALL REFLEX REFLECTOR ASSEMBLY RH

    Tech Tips

    Use the same procedure described for the LH side.

  3. INSTALL REAR UPPER BUMPER COVER LH


    1. A004T0X

      Attach the claw to install the rear upper bumper cover.

    2. Install the screw.

  4. INSTALL REAR UPPER BUMPER COVER RH

    Tech Tips

    Use the same procedure described for the LH side.

  5. INSTALL NO. 3 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Click here

  6. INSTALL NO. 2 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Click here

  7. INSTALL NO. 1 ULTRASONIC SENSOR RETAINER (w/ TOYOTA Parking Assist-sensor System)

    Click here

  8. INSTALL ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

    Click here

  9. INSTALL ULTRASONIC SENSOR CLIP (w/ TOYOTA Parking Assist-sensor System)

    Click here

  10. INSTALL NO. 1 ULTRASONIC SENSOR (w/ TOYOTA Parking Assist-sensor System)

    Click here

  11. INSTALL NO. 2 FRAME WIRE (w/ TOYOTA Parking Assist-sensor System)


    1. Attach the 4 clamps to install the No. 2 frame wire.

    2. Connect the 4 connectors.

      A004MOQ

  12. INSTALL REAR BUMPER PAD LH


    1. Clean the rear bumper cover surface.


      1. Using a heat light, heat the rear bumper cover surface.

      2. Remove the double-sided tape from the rear bumper cover.

      3. Wipe off any tape adhesive residue with cleaner.

    2. A004P40

      Install a new rear bumper pad.


      1. Remove the peeling paper from the face of a new rear bumper pad.

        Tech Tips

        After removing the peeling paper, keep the exposed adhesive free from foreign matter.

      2. Install the rear bumper pad as shown in the illustration.

  13. INSTALL REAR BUMPER PAD RH

    Tech Tips

    Use the same procedure described for the LH side.