HEADLIGHT LEVELING ECU(for RHD) INSTALLATION

PROCEDURE

1. INSTALL HEADLIGHT LEVELING ECU ASSEMBLY

   
   

   1. Install the headlight leveling ECU assembly with the bolt.

      Torque:

      12 N*m  { 122 kgf*cm, 9 ft.*lbf }

   2. Connect the connector.

2. INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

   Click here

3. CONNECT CABLE TO NEGATIVE BATTERY TERMINAL

   Note

   When disconnecting the cable, some systems need to be initialized after the cable is reconnected Click here.