STOP LIGHT SWITCH INSTALLATION

PROCEDURE


  1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER


    1. Install the stop light switch mounting adjuster to the pedal support.

  2. INSTALL STOP LIGHT SWITCH ASSEMBLY


    1. A004NS8E39
      Text in Illustration
      *1 Brake Pedal
      *2 Adjuster
      *3 Stop Light Switch

      Install the stop light switch to the adjuster until the switch body slightly touches the brake pedal.

      Note

      Do not depress the brake pedal.

    2. A004O9FE52
      Text in Illustration
      *1 Shaft
      *2 1.5 to 2.5 mm
      *3 Stop Light Switch

      Rotate the stop light switch counterclockwise so that the clearance is between 1.5 and 2.5 mm as shown in the illustration.

      Torque:
      1.5 N*m  { 15 kgf*cm, 13 in.*lbf }

      Note

      Do not depress the brake pedal.

    3. Check the stop light switch clearance.

      Stop light switch clearance
      1.5 to 2.5 mm (0.0590 to 0.0984 in.)

    4. Connect the connector to the stop light switch.

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here