STOP LIGHT SWITCH INSTALLATION

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for RHD and LHD vehicles.

  • The procedure listed below is for LHD vehicles.

PROCEDURE


  1. INSTALL STOP LIGHT SWITCH MOUNTING ADJUSTER


    1. Install a new stop light switch mounting adjuster to the pedal support.

  2. INSTALL STOP LIGHT SWITCH ASSEMBLY


    1. A004RSN

      Insert the stop light switch assembly to the stop light switch mounting adjuster until the switch body slightly touches the brake pedal.

      Note

      Do not depress the brake pedal.

    2. A004O9FE53
      Text in Illustration
      *a Shaft
      *b 0.5 to 2.6 mm

      Rotate the stop light switch assembly clockwise by approximately one fourth of a rotation.

      Note

      Do not depress the brake pedal.

    3. Check the stop light switch clearance.

      Stop light switch clearance
      0.5 to 2.6 mm (0.0197 to 0.1024 in.)

    4. Connect the connector.

  3. INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

    Click here