AUTOMATIC LIGHT CONTROL SENSOR REMOVAL

PROCEDURE


  1. REMOVE FRONT ROOF TOP GARNISH

    A004NVFE02
    *1 w/o Roof Sunshade System:
    *2 w/ Roof Sunshade System:

    1. Detach the clip and 2 claws and remove the front roof top garnish.

      Note

      When removing the rain sensor cover, do not apply force to the lane recognition camera sensor assembly areas labeled "X".

  2. REMOVE NO. 1 RAIN SENSOR COVER


    1. A004SAV

      Detach the 3 claws and remove the rain sensor cover.

  3. REMOVE NO. 2 RAIN SENSOR COVER


    1. A004OKA

      Using a screwdriver, detach the 2 claws and remove the No. 2 rain sensor cover.

  4. REMOVE RAIN SENSOR


    1. A004MTG

      Detach the 2 claws and remove the rain sensor.

      Note

      Do not touch the silicon mixture directly with a finger.

    2. A004NBE

      Disconnect the connector.

      Note

      Do not touch the silicon mixture directly with a finger.