LICENSE PLATE LIGHT ASSEMBLY(for Sedan) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH sides.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE LICENSE PLATE LIGHT LENS


    1. A004SY0

      Insert a screwdriver into the hole of the license plate light lens.

      Tech Tips

      Tape the screwdriver tip before use.

      Text in Illustration
      A004PF6 Protective Tape

    2. Slightly push the screwdriver in the direction indicated by the arrow shown in the illustration to widen the license plate light lens with the tip of the screwdriver to detach the claw.

    3. Detach the remaining claw and remove the license plate light lens.

  2. REMOVE LICENSE PLATE LIGHT BULB


    1. A004TXA

      Remove the license plate light bulb.

  3. REMOVE BACK DOOR ASSIST GRIP

    Click here

  4. REMOVE DOOR ASSIST GRIP

    Click here

  5. REMOVE BACK DOOR TRIM COVER

    Click here

  6. REMOVE LICENSE PLATE LIGHT ASSEMBLY


    1. A004S73

      Disconnect the connector.

    2. A004MQZ

      Detach the 2 claws and remove the license plate light assembly.

  7. REMOVE LICENSE PLATE LIGHT BODY GASKET


    1. Remove the a license plate light body gasket.

      Note

      The gasket must not be reused.