BACK-UP LIGHT ASSEMBLY(for Sedan) REMOVAL

CAUTION / NOTICE / HINT

Tech Tips


  • Use the same procedure for the RH and LH side.

  • The procedure listed below is for the LH side.

PROCEDURE


  1. REMOVE BACK DOOR ASSIST GRIP

    Click here

  2. REMOVE DOOR ASSIST GRIP

    Click here

  3. REMOVE BACK DOOR TRIM COVER

    Click here

  4. REMOVE REAR LIGHT LENS AND BODY LH


    1. A004SU3

      Disconnect the connector.

    2. Remove the 4 nuts and rear light lens and body LH.

  5. REMOVE REAR LIGHT PACKING LH


    1. Remove the rear light packing LH.

      Note

      Be sure to remove the gasket completely from the body.

  6. REMOVE BACK UP LIGHT BULB


    1. A004MW2

      Turn the rear light socket and wire LH in the direction indicated by the arrow in the illustration and remove the socket.

    2. Remove the back up light bulb from the rear light socket and wire LH.

  7. REMOVE REAR LIGHT SOCKET AND WIRE LH


    1. A004QPA

      Using a screwdriver, detach the 2 claws.

    2. Detach the guide and remove the rear light socket and wire LH.

    3. Disconnect the connector.