CAUTION / NOTICE / HINT
Tech Tips
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
PROCEDURE
INSTALL REAR COMBINATION LIGHT BULB HOLDER LH
Connect the connector.
Attach the 2 claws and clamp.
Attach the guide to install the rear combination light bulb holder LH.
INSTALL REAR TURN SIGNAL LIGHT BULB
Install the rear turn signal light bulb to the rear combination light bulb holder LH.
Turn the rear combination light bulb holder LH in the direction indicated by the arrow in the illustration to install the socket.
INSTALL REAR COMBINATION LIGHT BODY GASKET LH
Install a new rear combination light body gasket LH.
INSTALL REAR COMBINATION LIGHT LENS AND BODY LH
Attach the clip to install the rear combination light lens and body LH.
Install the 3 nuts.
Connect the connector.
INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH
INSTALL INNER ROOF SIDE GARNISH CAP LH
INSTALL BACK DOOR WEATHERSTRIP
INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH
INSTALL REAR DOOR SCUFF PLATE LH
INSTALL FRONT DECK FLOOR BOX
INSTALL REAR FLOOR FINISH PLATE
INSTALL DECK FLOOR BOX LH
INSTALL DECK FLOOR BOX RH
INSTALL ROPE HOOK ASSEMBLY (w/o Deck Rail)
INSTALL NO. 6 DECK SIDE TRIM COVER (w/o Deck Rail)
INSTALL NO. 5 DECK SIDE TRIM COVER (w/o Deck Rail)
INSTALL NO. 2 DECK SIDE TRIM COVER (w/o Deck Rail)
INSTALL NO. 1 DECK SIDE TRIM COVER (w/o Deck Rail)
INSTALL FLOOR SIDE RAIL LH (w/ Deck Rail)
INSTALL FLOOR SIDE RAIL RH (w/ Deck Rail)
INSTALL REAR DECK FLOOR BOX
INSTALL NO. 3 DECK BOARD SUB-ASSEMBLY
INSTALL NO. 2 DECK BOARD SUB-ASSEMBLY
INSTALL DECK BOARD SUB-ASSEMBLY
INSTALL DECK BOARD ASSEMBLY
INSTALL LOWER DECK TRIM SIDE BOARD LH (w/ Partition Board)
INSTALL LOWER DECK TRIM SIDE BOARD RH (w/ Partition Board)
INSTALL ROOM PARTITION NET ASSEMBLY (w/ Partition Net)
INSTALL TONNEAU COVER ASSEMBLY (w/ Tonneau Cover)
INSTALL REAR SIDE SEATBACK ASSEMBLY LH
INSTALL REAR SIDE SEATBACK ASSEMBLY RH
INSTALL REAR BENCH TYPE SEAT CUSHION ASSEMBLY